Sharp MX-3070N

7-163
SYSTEM SETTINGS►SETTING MODE FOR FAX
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items Factory default setting U A
■ System Settings
Yes Yes
● Image Send Settings (page 7-165) No Yes
X Fax Settings No Yes
 Default Settings No Yes
• Resolution Setting No Yes
- Apply the Resolution Set when Stored Disable No Yes
+ (No item) Standard No Yes
• Dial Mode Setting Tone No Yes
• Auto Wake Up Print Active No Yes
• Pause Time Setting 2 seconds No Yes
• Fax Dest. Confirmation Mode Disable No Yes
• Speaker Settings No Yes
- Speaker Volume: Yes No
- Ringer Volume Volume: No Yes
- Line Monitor Volume: No Yes
- Fax Receive Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
No Yes
- Fax Send Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
No Yes
- Fax Communication Error Signal Volume: 5; Tone Pattern: 3 No Yes
• Remote Reception Number Setting 55 No Yes
• Connecting Optional Receiver Disable No Yes
• External Telephone Setting Disable No Yes
• Tel/Fax Auto Change Disable No Yes
• Original Print on Transaction Report Print at Error No Yes
• Transaction Report Print Select Setting No Yes
- Single Sending Print Out Error Report Only No Yes