2-44
COPIER►BASIC PROCEDURE FOR MAKING COPIES
3
Select binding edge and original settings.
► MAKING COPIES IN PAMPHLET FORMAT (BOOKLET) (page 2-59)
After the settings are completed, tap .
In normal mode
• To change the output tray, tap the [Output Tray] key, and select the output destination.
• If [Booklet Copy] is already specified in [Others], you do not need configure binding edge and cover settings.
• If [Booklet Copy] is specified in [Others], the saddle stitch screen appears. Confirm the message shown on the screen,
and tap the [On] key.
• If the number of scanned originals exceeds the staple sheet limit, a message is displayed. Tap the [Divide], [Continue]
or [Cancel] key.
[Divide]: Divides the pages into sets that can be stapled and sorts them. You cannot use this function if the cover
settings are selected.
[Continue]: Continues sorting without stapling.
[Cancel]: Cancels the staple sort setting.
To Next Page
Loading...
