Sharp MX-3070N

2-94
COPIER►OTHER FUNCTIONS
• When [Different Width] is selected, "2→2" and "2→1" of automatic two-sided copying can be used. When [Different Width]
is selected, automatic 2-sided copying cannot be used.
• When [Different Width] is selected, the staple function cannot be used.
• The mixed size original function cannot be used to copy originals that are the same size but are placed in different
orientations (8-1/2" x 11" and 8-1/2" x 11"R (A4 and A4R), etc.).
To set the machine to always scan mixed originals
• In "Setting mode (administrator)", select [System Settings] → [Device Control] → [Original Feeding Mode].
• Output, N-Up, and other functions will have the same settings as the first page.
1
Tap the [Others] key, and tap the [Mixed Size Original] key.
2
Tap the [Same Width] key or the
[Different Width] key as appropriate for
the originals.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the mixed size original setting
Tap the [Off] key.
3
Place the original face up on the
document glass.
Place the original as shown on the Mixed Size Original
screen.
For mixed size originals, set "Original" to "Auto".
4
Tap the [Color Start] or [B/W Start] key to start copying.
Others
Mixed Size Original
Preview
Start
Color
Start
Off
Same Width
Place the same width
originals.
Different Width
Back
Change Size/Direction.
Original
2-Sided Copy
CA
B/W
411x17
A3(11" x 17")
B4(8-1/2" x 14")
A3(11" x 17")
Place the originals with th
corners aligned together i
the far left corner.
B4
(8-1/2" x 14")