4-97
FACSIMILE►OTHERS FUNCTION
2
Enter the destination fax number.
• Entering a destination number using the numeric keys►page 4-11
• Retrieving a destination from an address book►page 4-12
• Using a search number to retrieve a destination►page 4-15
• Retrieving a destination from a global address book►page 4-16
• Using a transmission log to resend►page 4-18
3
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 4-8)
4
Tap the [Others] key, and tap the [Timer] key.
5
Tap the [On] key.
6
Specify the date.
7
Specify the time (hour and minute) in 24-hour format.
After the settings are completed, tap .
• Tap the areas displaying the hour and minute respectively, and enter the values using the numeric keys.
• It is convenient to use to finely adjust the time.
• The setting will show the current time. If the time is not correct, press the [CA] key to cancel the operation. Correct the
time in setting mode and then perform the timer transmission procedure. To cancel the Timer Transmission settings:
Tap the [Off] key.
► BEFORE USING THE MACHINE AS A FAX (page 4-4)
To cancel the Timer Transmission settings:
Tap the [Off] key.
To set the date and time of the machine:
In "Setting mode", select [System Settings] → [Common Settings] → [Clock /Adjust].
If [Disabling of Clock/ Adjustment] has been enabled, the date and time cannot be modified. In this case, select [System
Settings] in "Setting mode (administrator)" and select [Common Settings] → [Enable/Disable Settings] to disable the
[Disabling of Clock/ Adjustment] setting.
Back
Monday
Wednesday
Friday
Today
Tuesday
Thursday
Saturday
Sunday
Others
File
Store Data in Folder
Quick File
Store Data Temporarily
Polling
Receive Other's Original
reception memory
100%
Speaker
Start
Timer
Off
On
Sat06/06/2015
11 1 0
CA
Preview
To Next Page
Loading...
