4-112
FACSIMILE►PERFORMING F-CODE COMMUNICATION
3
Tap the [Others] key, and tap the [Memory Box] key.
You cannot set the Program, Timer, Transaction Report, Polling, and Document Filing.
4
Tap the [Others] key, and tap the [Memory Box] key.
5
Tap the [Polling Memory] tab.
6
Tap the folder of the F-code memory polling box.
7
Tap the [Change Number of Times] key on the action panel, and set the
polling times.
To repeat transmitting an original, tap the [Unlimited] key. Change the settings as necessary.
After the settings are completed, tap and key.
8
Tap the [Start] key.
Scanning of the original starts.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
• When you place the original on the document glass, scan each page one at a time.
• When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
When you use the auto document feeder to scan an original, you can tap the [Preview] key to check a preview of the
image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED (page 4-28)
".
However, settings for this function cannot be changed in the preview screen.
Back
Confidential Polling Memory
Folder Name
Public Box
Times
Once
reception memory
100%
Start
Change Number of Times
CA
8½x11 8½x11
To Next Page
Loading...
