5-82
SCANNER/INTERNET FAX►Other functions
2
Tap the mode display to switch to the initial screen of each mode.
► Changing mode from each mode (page 5-9)
3
Specify the destination.
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-17)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-18)
► ENTERING AN ADDRESS MANUALLY (page 5-19)
► SPECIFYING A NETWORK FOLDER (page 5-20)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-21)
► USING A TRANSMISSION LOG TO RESEND (page 5-23)
4
Tap the [Others] key, and then tap the [Drop Out Color] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the drop out color setting
Tap the [Drop Out Color] key to uncheck it.
5
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
When you use the auto document feeder to scan an original, you can tap the [Preview] key to check a preview of the
image before sending an image. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED (page
5-59)".
Tap the [Change Setting] key in the scan-end confirmation screen to change the exposure, resolution, scan size, and
send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.)
To Next Page
Loading...
