Sharp MX-3070N

7-7
SYSTEM SETTINGS►USER CONTROL
X User Information Print – No Yes
X Release the Lock on Machine Operation Panel – No Yes
X Reset Counter After Sending E-mail Status Disabled No Yes
● Page Limit Group List (page 7-64) – No Yes
● Machine Page Limit Setting (page 7-64) – No Yes
● Authority Group List (page 7-65) – No Yes
● Favourite Operation Group (page 7-69) – No Yes
X Favourite Operation Group List – No Yes
X Favourite Key List – No Yes
X Home Screen List – No Yes
● User Count (page 7-71) No Yes
X View User Count – No Yes
X Save User Count – No Yes
● Billing Code Settings (page 7-72) No Yes
X Security Control – No Yes
 Use Billing Code Disabled No Yes
 Default Code Setting usecode No Yes
 Remember Billing Code Between Modes Disabled No Yes
 Disable Change of Billing Code Disabled No Yes
 Apply Default Code when Billing Code not entered
Billing Code not Entered
Disabled
No Yes
 Disable Billing Code for Selected Applications No Yes
• Application Name registered as Standard
Application
All Invalid
No Yes
 Billing Code Display Name Setting No Yes
• Main Code Display Name Default No Yes
• Sub Code Display Name Default No Yes
X Main Code List – No Yes
X Sub Code List – No Yes
● Card Area Setting (page 7-75) No Yes
X Check System Code only in FeliCa User Area mode Disabled No Yes
X Check Facility Code in HID mode Disabled No Yes
X Importing from the setup file – No Yes
● CARD TYPE/READER SETTINGS (page 7-75) No Yes
X Card Type / Card Reader – No Yes
X Use IC Card for Authentication Disabled No Yes
Setup Items Factory default setting U A