7-19
SYSTEM SETTINGS►USER CONTROL
Inbound Routing (Forwarding/Storing) Settings
Metadata Settings
Setup Items Factory default setting U A
● Inbound Routing (Forwarding/Storing) Settings (page 7-101)
X Inbound Routing Settings – No Yes
X Sender Address Registration – No Yes
X Security Control No Yes
Inbound Routing Settings No Yes
• Forwarding of Received Data Enabled No Yes
• Disable Registration of Forward Table Disabled No Yes
• Disable Change/Delete of Forward Table Disabled No Yes
• Disabling of Forward Condition Change Disabled No Yes
• Print Style Setting Save Only at Error No Yes
• File Naming – No Yes
- If received from a contact registered in the
address book, sender's name is changed to
contact's name.
Disabled
No Yes
X Inbound Routing (Storage) Settings No Yes
Settings for HDD Storing of Received Data No Yes
• Auto Storing of Received Data in HDD Disabled No Yes
• Specifying Data to be Stored No Yes
-Fax Disabled No Yes
- Internet Fax Disabled No Yes
• Specifying Stored Folder – No Yes
- Sort Received Faxes by Date in Folders Disabled No Yes
• File Format PDF No Yes
• File Naming – No Yes
- If received from a contact registered in the
address book, sender's name is changed to
contact's name.
Disabled
No Yes
Setting of Result Notification Address at Storing No Yes
• Reception Notification Settings Disabled No Yes
• Address of Notification Destination – No Yes
• Direct Entry – No Yes
Setup Items Factory default setting U A
● Metadata Settings (page 7-105)
X Metadata Settings No Yes
Metadata Settings Enabled No Yes
X Metadata Settings – No Yes
To Next Page
Loading...
