7-24
SYSTEM SETTINGS►USER CONTROL
Common Settings
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A
● Common Settings (page 7-113)
X Paper Settings Yes Yes
Tray Settings/ Paper Settings Yes Yes
• Tray Settings/ Paper Settings Yes Yes
- Auto Tray Switching Enabled Yes Yes
- Display Paper Tray Settings when bypass tray
detects paper.
Enabled Yes Yes
- Tray 1
Plain, 8-1/2" x 11" (A4)
Yes Yes
- Tray 2 Yes Yes
- Tray 3 Yes Yes
- Tray 4 Plain Paper: B5 Yes Yes
- Bypass Plain, Auto-AB Yes Yes
Custom Size Registration (Bypass) Custom 1 to 7
Size Input-AB
X=420mm Y=297mm
Yes Yes
Paper Type Registration – Yes Yes
X Operation Settings No Yes
Default Settings No Yes
• Enlarge Display Mode Disabled No Yes
• Message Time Setting 6 seconds No Yes
• Language US English No Yes
• Default Display Settings Home Screen No Yes
• Display Favorite Menus as Default Disabled No Yes
• Display Action Panel as default. Enabled No Yes
• Icon is displayed when network cable is not
connected.
Enabled
No Yes
• Display Confirmation Dialog when job is cancelled. Enabled No Yes
• Switch the Number of Sets to be Displayed for Job
Status
Remaining Sets
No Yes
• Alignment Order of 10-Key Setting Display from Main Unit No Yes
• Setting Display from Main Unit No Yes
- Display Current Path Enabled No Yes
- Enable link of current path Enabled No Yes
• MFP Display Pattern Pattern 1 No Yes
• Key Operation Setting No Yes
- Keys Touch Sound Middle No Yes
To Next Page
Loading...
