Sharp MX-3070N - Page 683

To Next Page

To Previous Page

7-26

SYSTEM SETTINGS►USER CONTROL

• Modes to Display Enabled No Yes

X Keyboard Settings No Yes

 Default Keyboard Setting No Yes

• Keyboard Select US English No Yes

• Set Keyboard Priority External Keyboard No Yes

 Soft Keyboard Template Setting – No Yes

X Device Control No Yes

 Original Size Detector Setting No Yes

• Original Detection Size Combination AB-1 No Yes

• Cancel Detection at Document Glass Disabled No Yes

 Original Feeding Mode All Disabled No Yes

 Paper Type for Auto Paper Selection Plain No Yes

 Set Tandem Print No Yes

• IP Address of Slave Machine 0.0.0.0 No Yes

•Port No. 50001 No Yes

• Tandem Mode No Yes

- Disabling of Master Machine Mode Disabled No Yes

- Disabling of Slave Machine Mode Disabled No Yes

• Auto Switching of Finisher Trays Enabled No Yes

 Detect Standard in Auto Colour Mode 3 (Normal) No Yes

 Status Indicator Pattern 1 No Yes

• Status Indicator will blink if data is received Enabled No Yes

• Total Setting for Finish Specify Finishing Position Based

on Paper Selected.

No Yes

 Plain Paper Weight Settings No Yes

• Paper Weight 60 to 89g/m

(16 to 23 lbs.) No Yes

 Paper Type for Postcards Heavy 1 No Yes

 Data List One Sided No Yes

 Disabling of Duplex Disabled No Yes

 Disabling of Offset Disabled No Yes

 Disabling of Document Feeder Disabled No Yes

 Disabling of Optional Paper Drawer Disabled No Yes

 Disabling of Tray Settings/Paper Settings Disabled No Yes

 Disabling of Finisher Disabled No Yes

 Disabling of Stapler Disabled No Yes

 Disabling of Punch Disabled No Yes

Setup Items Factory default setting U A

Other manuals for Sharp MX-3070N