Sharp MX-3070N

7-102
SYSTEM SETTINGS►SYSTEM SETTINGS
Sender Address Registration
Stores new sender number or address to be used for inbound routing.
Security Control
Stores the administration settings to be used for inbound routing.
Sender Number/Address Setting
Select the sender facsimile number or the Internet fax address.
Before you select a sender number or address, store the destination number or address.
To forward all received data, select [Forward All Received Data].
deleted Deletes the selected address.
Forwarding condition 1/2/3
You can set the forwarding date and destination.
• Forwarding conditions: Set the data forwarding conditions.
• Day of week: Select a day of week to start data forwarding.
• Start time: Set a time to start data forwarding.
• End time: Set a time to end the data forwarding.
• Format: Select a format of forwarding data.
Forwarding Destination List
Lists the addresses that can be set as the destination. Select a destination by setting it to
.
Add (Selecting from Address
Book)
Open the address book and enter a forwarding destination.
Add (Direct Entry) Enter the destination name directly.
List name Settings
Address to be Entered Displays the entered sender number or address.
Fax Number
Enter a facsimile number to be stored as the sender. When you enter multiple sender
numbers, separate them by a semicolon (;) or a comma (,). When you tap the [Global
Address Search] key, the global address search screen appears.
I-Fax Address
Enter an Internet fax address to be stored as the sender. When you enter multiple sender
numbers, separate them by a semicolon (;) or a comma (,). When you tap the [Global
Address Search] key, the global address search screen appears.
deleted Deletes the selected sender number or address.
Add to List Adds the entered sender number to the list.
List name Settings
Forwarding of Received Data Sets the inbound routing function.
Disable Registration of Forward
Table
Disables the registration of forward table.
Disable Change/Delete of
Forward Table
Disables a change of forward table.
Disabling of Forward Condition
Change
Disables a change of data forwarding conditions.
Disable Temporal Forward
Setting from Operation Panel
Disables a temporal data forward setting from the machine.
Print Style Setting
Sets a print style of received data.
If you have selected the [Always Save] or [Save Only at Error] option, enter a file name.
List name Settings