7-141
SYSTEM SETTINGS►SYSTEM SETTINGS
Settings
Setup Items Setting
Name Enter the address book name.
Search Root
Enters the search defaults to search for a specific area of the LDAP directory information tree.
Example: o = ABC, ou = NY, cn = Everyone
Entries must be separated from each other by semicolons or commas.
LDAP Server Enter the IP address or host name of the LDAP server.
Server Type
Select the Default or Custom from the service type list. The default setting is Default.
User Identity Attribute Set the user ID property. The default setting is "uid".
Search Attribute Set the LDAP search property. The default setting is "cn".
Obtain E-mail address from Set the e-mail address search. The default setting is "mail".
Obtain Internet Fax address from Set the Internet Fax address search. The default setting is "mail".
Obtain Fax number from Set the fax number search. The default setting is "facsimileTelephoneNumber".
Public Key Search Sets the open key search. The default setting is "userCertificate".
Pages Limit Group Set the Storing Page Limit Group Search. The default setting is "pagelimit".
Authority Group Set the Storing Authority Group Search. The default setting is "authority".
Favourite Operation Group Set the Favorite Operation Group Search. The default setting is "favorite".
My Folder Set the My Folder Search. The default setting is "myfolder".
Card ID Sets the card ID search. The default setting is "cardid".
Home Directory Path Enter a maximum of 127 full-width/half-width characters for the home directory path.
User Name
Enter a maximum of 127 full-width/half-width characters for the user name for home
directory path authentication.
PIN Code/Password
Enter a maximum of 255 numeric digits for the password for home directory path
authentication.
Custom Property 1-10 Enter each custom property.
Port No. Enter a port number. The default setting is port 389.
Timeout Enter a timeout. The default setting is 5 seconds.
User Name Enter the account name for LDAP setting.
PIN Code/Password
Enter the password.
To change the password, set [Change Password] to .
Authentication Select the authentication server from the drop-down list.
Bind Prefix Set the Bind prefix. The default setting is "uid".
Server Usage
Set the server application.
Set the address book and user authentication.
Enable SSL Enables the SSL encryption communication.
Connection Test Tap the [Execute] button, and the connection test is executed and its result is displayed.
When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see
"TURNING ON THE POWER".
To Next Page
Loading...
