Shihlin electric SF-GT Series User Manual

Parameter Description
Parameters
167
If both P.288 and P.290 are 0, P.289 and P.291 will be displayed as 0.
Abnormal code corresponded alarm condition:
Abnormal
code
Alarm
type
Abnormal
code
Alarm
type
Abnormal
code
Alarm
type
Abnormal
code
Alarm
type
Abnormal
code
Alarm
type
00
No
alarm
32 OV1 49 THN 82 IPF 144 OHT
16 OC1 33 OV2 50 NTC 97 OLS 160 OPT
17 OC2 34 OV3 64 EEP 98 OL2 179 SCP
18 OC3 35 OV0 65 FAN 112 BE 192 CPU
19 OC0 48 THT 66 PID 129 AEr 193 CPR
209 PG1 210 PG2 211 PG3
5.75 Accumulative Motor Operation Time Function (P.292 and P.293)
P.292 “Accumulative motor operation time (minutes)”
P.293 “Accumulative motor operation time (days)”
Parameter Factory setting Setting range Remarks
292 0 min 0~1439min ---
293 0 day 0~9999day ---
<Setting>
• P.292 is about the accumulative motor operation time in minutes. The updated value cannot
be modified by executing P.998 or power shutdown. To clear the accumulated time, make
P.292=0.
• P.293 is about the accumulative motor operation time in days. The updated value cannot be
modified by executing P.998 or power shutdown. To clear the accumulated time, make
P.293=0.
5.76 Password Protection Function (P.294 and P.295)
P.294 “Decryption parameter”
P.295 “Password setup”
Parameter Factory setting Setting range Remarks
294 0 0~65535 ---
295 0 2~65535 ---

Shihlin electric SF-GT Series Specifications

General

Brand	Shihlin electric
Model	SF-GT Series
Category	Inverter
Language	English