Shihlin electric SF-GT Series User Manual

Parameter Description
Parameters
193
5.96 Restoration of the Parameters to the Default Values (P.998
and P.999)
P.998 “Restoring all parameters to default values”
P.999 “Restoring some parameters to default values”
● Once P.998 is read-out (after the read-out, the screen will display ) and rewritten-in,
all the parameters will be restored to the default values
except P.21, P.90, P.188, P.189, P.285, P.286, P.292 and P.293.
● Once P.999 is read-out (after the read-out, the screen will display ) and rewritten-in,
all the parameters will be restored to the default values
except P.21, P.90, P.188, P.189, P.190, P.191, P.192~P.195, P.196~P.199, P.285, P.286, P.
292, P.293, P.300~P.312、P.320~P.326.
● After performing P.998 and P.999, the screen will display , indicating that the
parameters have been restored to the default values.
Note: The parameter P.998 is only executable in the PU mode. For the flow chart of transferring operation
modes, please refer to 4.1.1.

Shihlin electric SF-GT Series Specifications

General

Brand	Shihlin electric
Model	SF-GT Series
Category	Inverter
Language	English