Shihlin electric SF-GT Series User Manual

Parameter Description
Parameters
67
5.10 JOG Mode (P.15 and P.16)
P.15 “JOG frequency”
P.16 “JOG acceleration / deceleration time”
● In JOG mode, the output frequency is the set value
of P.15, and the acceleration / deceleration time is
the set value of P.15.
Parameter Factory setting Setting range Remarks
15 5Hz 0~650Hz ---
16 0.5s
0~360s P.21
=0
0~3600s P.21=1
P.16
P.20
P.15
P.15
P.20
P.16
Running
forward
Running
backward
Press
FWD
Press
REV
Output frequency
Time
Note: Please refer to Section 4.1.1
for how to enter the JOG mode.
5.11 Stall Prevention (P.22, P.23 and P.66, P.220)
P.22 “Stall prevention operation level”
P.23 “Compensation factor at level
reduction”
P.66 “Stall prevention operation
reduction starting frequency”
P.220“Stall selection of time of
acceleration and deceleration”
Related parameters
P.20 “Acceleration/deceleration
reference frequency”
P.21“Acceleration/deceleration
time increments”
P.189“
Factory setting function
”
Related parameters

Shihlin electric SF-GT Series Specifications

General

Brand	Shihlin electric
Model	SF-GT Series
Category	Inverter
Language	English