Shimadzu SPD-M20A User Manual

Chapter 5: Assembly and Disassembly of Parts
SPD-M20A Service Manual
18
1) Press the hinge in the direction indicated by [A] in the diagram, and insert it to the
base of the shaft.
2) While adjusting the heights of both sides of 1 in the diagram below, fix the
location of
2 on the main unit, and attach by tightening the screw.
Detail 1 Detail 2
NOTE
 Grasp the driver with the thumb, middle finger and index finger, and tighten it
until it is firmly in place.
Temporarily placing the right hinge (top and bottom)
3) Attach the right panel ASSY, and place the upper left part of the right door on 3
of the diagram below. Tighten the screw lightly.
Detail 3

Shimadzu SPD-M20A Specifications

General

Brand	Shimadzu
Model	SPD-M20A
Category	Security Sensors
Language	English