Shuttle Omninas KD21 - Network Management

English
3-30
network ManaGeMent web interFace
Network Management
This section provides information and guidelines to congure your Wi-Fi and network settings.
Note:
Wi-Fi function is only available on the KD22 model.
Before beginning congure your Network settings, see Conguring Network Settings.
Conguring Network Settings
In the main menu under Settings, click on Network to change the network conguration. You
are prompted to enter an OMNINAS name and Workgroup. Assign a static IP address or select
DHCP to allow your router to assign one.
Before beginning, ll in the Name and Workgroup elds.
A suggested naming convention for the device name is to assign the name by the location or par-
ticular use for the OMNINAS device, for example: MediaNAS, Music-NAS, or Family-NAS.
The workgroup is a collection of computer on a dened network. You will need to know the name
of the specic workgroup to assign this name.
DHCP Settings
Note:
Your router must be DHCP enabled.
1. In Settings, click the Network tab.
2. Click Automatically assign IP address (DHCP) to have your router designate an IP ad-
dress.