SICK M4000 Advanced

Operating Instructions Chapter 6
M4000 Adv., Adv. A/P, Area
8010797/PA53/27-06-05 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
47
Electrical installation
6.3 Configuration connection M8× 4 (serial interface)
Pin M4000 PC-side RS@232@D@Sub
1 Not assigned
2 RxD Pin 3
3 0 V DC (voltage supply) Pin 5
4 TxD Pin 2
The pin assignment of sender, receiver and M4000 Advanced A/P is identical.
 After configuration always remove the connecting cable from the configuration
connection!
 After the configuration of the device has been completed, locate the attached
protection cap to cover the configuration connection.
Fig. 33: Pin assignment
configuration connection
M8
 × 4
Tab.
20
:
Pin assignment
configuration connection
M8  × 4
Note
2
1
4
3
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr