Siemens 7SR51 - Information List

Settings > Functions > Function Config
Function Group Range Settings
Default Gn1 Gn2 Gn3 Gn4
60CTS CT Supervision Enabled
Disabled
Disabled
60CTS-V Enabled
Disabled
Disabled
60VTS Enabled
Disabled
Disabled
74CCS Close circuit Enabled
Disabled
Disabled
74TCS Trip circuit Enabled
Disabled
Disabled
78VS Vector shift Enabled
Disabled
Disabled
79 Auto reclosing Enabled
Disabled
Disabled
81 Frequency Enabled
Disabled
Disabled
81HB2 Inrush Enabled
Disabled
Disabled
81R Frequency df/dt Enabled
Disabled
Disabled
87GH Restricted EF Enabled
Disabled
Disabled
CB Counters Enabled
Disabled
Disabled
I
2
t CB Wear
Enabled
Disabled
Disabled
Information List
Input/Output Matrix
General
Pickup
User Logic Type IEC 103 DNP3 MODBUS
RTU
The complete serial protocol information list containing the DNP3, IEC 60870-5-103, and Modbus RTU data
information for the configured device can be generated using the Export Report feature in the Reydisp
Manager tool, Serial Comms & Events.
4.3.6
7SR51 Function Templates
4.3 Function Configuration
Reyrolle 7SR5, Overcurrent Protection Device, Device Manual 141
C53000-G7040-C014-1, Edition 11.2019