Siemens 7SR51 - Indications and Instruments

Menu navigation. Binary output reset from home screen (3 second delay)
Binary input > Function key 0 (see 3.4 Binary Inputs )
Binary input > Function key 1 (see 3.4 Binary Inputs )
Indications and Instruments
LEDs
28 user programmable LEDs are provided on the device fascia in 2 columns.
A label is provided between the 2 columns of LEDs, this can be customized using the Relay LED Label
Template utility.
LED operation is configured in the Configuration > Binary Outputs > LED Config menu (see
3.5 Binary Outputs ).
[dw_7SR5_LEDLabelTemplate, 1, en_US]
Figure 3-2
Example LED Template
3.1.2
Device Functionality
3.1 Device Fascia
44 Reyrolle 7SR5, Overcurrent Protection Device, Device Manual
C53000-G7040-C014-1, Edition 11.2019