[dw_7SR5_7SR511ApplicationTemplate, 1, en_US]
Figure 2-5
Function Templates for 7SR5111 Devices
Default Function Template
The Default Function Template is the functionality included in the device when delivered from the
factory.
The RDM2 settings tool is used to add or remove Function Groups and Function Elements from the
Default Function template. Customization of the Default Template is typically carried out during the
engineering or installation phase of the project, prior to commissioning of the device.
Basic Structure of the Device Functionality
2.3 Function Groups and Function Elements
32 Reyrolle 7SR5, Overcurrent Protection Device, Device Manual
C53000-G7040-C014-1, Edition 11.2019
To Next Page
Loading...
