CLINITEK Status+ Analyzer Operator’s Guide 131
Support Information
Appendix B: Support Information
This appendix provides the technical support information for your
CLINITEK Status+ analyzer.
Installation Details
Please record the following information and keep this sheet in your
laboratory for future reference.
Limitations of Liability
In no event shall Siemens be liable for indirect, special or
consequential damages, even if Siemens has been advised of the
possibility of such damages.
For warranty service, contact your local technical support provider for
assistance, instructions, repair, or replacement of this instrument.
Legal Information
To contact a legal representative for Siemens Healthcare Diagnostics in
the European community, contact the Siemens Authorized
Representative.
When to Contact Technical Support
Call for assistance if the following circumstances occur:
• An error message continues to display after you perform the steps
as described on the screen and in Section 5, Troubleshooting.
• You need additional assistance about an analyzer problem.
• The problem is beyond the scope of this guide.
• You cannot solve the problem and an analyzer failure is apparent.
Date of Installation
Serial Number
To Next Page
Loading...
Need help?
General
