160 CLINITEK Status+ Analyzer Operator’s Guide
Glossary
Software Terms
The following table defines software terms commonly used on the
CLINITEK Status+ analyzer.
instrument The CLINITEK Status+ analyzer.
memory card An electronic storage device that stores the
analyzer software.
onboard printer The internal paper roll printer.
onboard printer cover The portion of the case that opens and
closes to cover the on-board printer.
power cord The cord that connects the analyzer to an
electrical outlet.
power switch The switch that turns the analyzer on and
off.
serial connector An RS232 connection used to transfer data
between the analyzer and a PC.
test table The plastic case that holds the test table
insert.
test table insert The plastic case that holds either the
cassette or urinalysis strip for testing.
touch screen The LCD display that lets the operator select
controls on the screen.
USB port The ports where USB cables are inserted.
urinalysis strip A Siemens urinalysis strip with test pads for
in vitro diagnostic use.
Term Definition
alert message A message that conveys information to the
operator about the analyzer.
alphanumeric Data comprised of alphabetic and numeric
characters.
audio alert Sounds emitted by the analyzer to draw the
operator’s attention to the analyzer.
Term Definition
To Next Page
Loading...
Need help?
General
