114 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
• Select a selected chemistry to exclude it.
6. Select Next to display the Reported Chemistries 2 of 2 screen,
which contains the rest of the chemistries.
• Select a chemistry to include it.
• Select a selected chemistry to exclude it.
7. To return to the Select Ready screen, perform the following steps:
a. Select Done.
b. Select Next.
c. Select Done twice.
Setting up the Authorized Operators
The CLINITEK Status+ analyzer stores 700 operators. You can authorize
operators to perform certain tasks, where they gain access to the
system by entering their name to perform those tasks. You can add,
edit, and delete authorized operators.
Note When you enable the Instrument Set Up password, you restrict
access to Instrument Set Up for only those operators who know the
password. If you enable the Authorized Operator setting and the
Instrument Set Up password, the operator name has priority over the
Instrument Set Up password.
Enable or Disable Authorized Operators
To enable or disable authorized operators, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up.
2. On the Choose Settings screen, select Instrument Settings.
3. On the Instrument Settings screen, select Authorized Operator.
4. On the Authorized Operator screen, for Authorized operators
only, select an option:
• To permit access only by authorized operators, select Enabled.
To Next Page
Loading...
Need help?
General
