CLINITEK Status+ Analyzer Operator’s Guide 85
System Configuration
7 System Configuration
You can configure your CLINITEK Status+ analyzer to suit your
workplace requirements. If you do not customize any configuration
settings, the system uses the default configuration settings.
• For instructions on how to unpack and install your
CLINITEK Status+ analyzer, see Section 1, Introduction.
• If you have a CLINITEK Status connector, and need instructions on
how to configure the connector, see the CLINITEK Status Connect
System Operator’s Guide, Section 6, System Configuration.
Default Settings
You can view and print the system configuration settings, as explained
in Viewing and Printing the System Configuration Settings‚ page 127.
The following table contains the system configuration options with
their default settings for English (US).
Note For CLINITEK Status connector system configuration settings,
see the CLINITEK Status Connect System Operator’s Guide, Section 6,
System Configuration.
Configuration Option Default Setting
Allow Results to be Sent to
PC
Enabled
Authorized Operator Disabled
Bar-code Reader Disabled
Chemistries Reported • Strip: ALB, BIL, BLO, CRE, GLU, KET,
LEU, NIT, pH, PRO, SG, URO
• Cassette: hCG
Custom Field Disabled
Date Format MM-DD-YY
Display Contrast 0 (zero)
Include Patient Name or
Patient ID in Results
Patient Name
Input Settings Quick Test
To Next Page
Loading...
Need help?
General
