90 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
Changing the System Configuration Settings
You can change the default system configuration settings to customize
the system for your point of care needs.
To change the system configuration settings, perform the following
steps:
1. On the Select Ready screen, select Instrument Set Up.
If password protection is enabled, the Enter Password screen
displays. Type a password. The characters you enter display as
asterisks. Select Enter.
The Choose Settings screen displays.
2. Use the up and down arrows to scroll through the list and highlight
a setting.
3. Select Select.
4. Make your changes to the settings.
5. Select Done until the Select Ready screen displays.
Changing the Language Settings
You can specify the language you want for your system. The following
languages are available:
• English
•Deutsch
•Français
•Italiano
•Español
•Svenska
•Japanese
•Chinese
To change the Language Settings, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up.
2. On the Choose Settings screen, select Language Settings.
To Next Page
Loading...
