CLINITEK Status+ Analyzer Operator’s Guide 137
Specifications
Safety Standards
The CLINITEK Status+ analyzer is classed as a Class A computing device
in accordance with Part 15 of the FCC Rules.
Note This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. The equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Safety Certifications
For safety certifications information, see the Declaration of Conformity
(DoC). Contact your local technical support provider for the DoC.
Electromagnetic Compatibility (EMC)
For electromagnetic compatibility (EMC) information, see the
Declaration of Conformity (DoC). Contact your local technical support
provider for the DoC.
Tables of Results
The analyzer displays and prints the test results for reagent strips and
cassettes in the following formats:
• English Units, Conventional
• English Units, International (SI)
• English Nordic Units, Nordic Plus System
To Next Page
Loading...
Need help?
General
