CLINITEK Status+ Analyzer Operator’s Guide 21
Introduction
Note If you run a CLINITEK Status+ analyzer with a CLINITEK Status
connector, you can alternatively insert a memory stick into the USB
port on the back of the Status connector.
Software Overview
The CLINITEK Status+ analyzer user interface consists of a touch screen
with an onscreen alphanumeric keyboard.
Touch Screen
Use the Select Ready screen to configure the analyzer, run tests, recall
results, and navigate to any point in the software (see Figure 1-7).
The Select Ready screen contains the following elements:
• Title bar Contains the current screen name, date, and time.
• Selection area Includes Instrument Set Up, Recall Results, Cassette
Test, and Strip Test.
For a complete list of icons with their descriptions, see Appendix E,
Symbols.
To Next Page
Loading...
