CLINITEK Status+ Analyzer Operator’s Guide 49
Operations
Completing the Cassette Full Test
Complete the testing for one cassette or continue testing one cassette
at a time until you finish testing all the cassettes you want to analyze.
To complete the cassette Full Test, perform the following steps:
1. Remove the used cassette from the test table, and dispose of it
according to your standard laboratory procedures.
2. Wipe the table insert, if necessary (see Section 4, Maintenance,
Weekly Cleaning of the Test Table and Test Table Insert‚ page 57).
3. Report the results to a laboratory supervisor or physician.
4. Select Done to complete the test.
5. Select Back to return to the Select Ready screen.
Note Keep the calibration bar clean to ensure accurate hCG results.
For details about cleaning the calibration bar, see Cleaning the White
Calibration Bar‚ page 51.
To Next Page
Loading...
