Siemens CLINITEK Status+ User Manual

20 CLINITEK Status+ Analyzer Operator’s Guide
Introduction
4. You can transfer the test results to a computer by using the RS-232
serial port on the back of the analyzer.
If you run a CLINITEK Status+ analyzer with a CLINITEK Status
connector, you can transfer the test results through a wireless or
wired Ethernet connection.
Printer
An internal thermal printer prints the test results.
Connections and Power
Connect the analyzer into an electrical outlet to use on a benchtop, or
use batteries so you can freely move the analyzer from one testing site
to another.
Memory Card Slot
The memory stores the analyzer software, operating parameters,
settings you select, up to 950 patient test results, and 200 authorized
operators. The information is stored in the memory, whether the
analyzer is powered on or off.
You can update the software by inserting a memory card into the slot
under the printer cover (see Figure 1-6).
Figure 1-6: Memory Card Slot
1 Memory Card Slot

Siemens CLINITEK Status+ Specifications

General

Display	LCD
Sample Type	Urine
Measurement Method	Reflectance photometry
Type	Urinalysis Analyzer
Test Types	Urine Chemistry
Connectivity	RS232 port
Weight	5.0 kg
Power Supply	100-240 V AC, 50-60 Hz
Data Storage	Up to 200 patient results
Test Parameters	Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ketone, Bilirubin, Glucose
Test Strips	Multistix and other compatible strips