Siemens CLINITEK Status+ User Manual

100 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
The Input Settings-Confirmation screen displays the custom
settings.
5. Select Done twice to return to the Select Ready screen.
Setting up the Urine Color and Clarity
You can configure the urine color and clarity for the urinalysis strip
patient test results in the following ways:
• Set the system to prompt you for the urine color, clarity, or both.
• Edit the urine color.
• Customize the urine color.
Screen 5 of 5
Custom Field • Enter Custom Field allows
you to create a label for a
custom field. For example, if
you create a label,
PHYSICIAN, the system
displays the prompt Enter
Patient Information
PHYSICIAN. Then, you
would enter the physician
name.
• Enabled displays the custom
field when you run a test.
• Disabled (default) does not
display the custom field when
you run a test.
To create a custom field name,
perform the following steps:
1. Select Enter Custom Field.
The Enter Custom Field
screen displays with a
keyboard.
2. Use the keyboard to enter a
custom field name.
3. Select Enter to return to the
Custom Settings screen.
Custom Setting Description

Siemens CLINITEK Status+ Specifications

General

Display	LCD
Sample Type	Urine
Measurement Method	Reflectance photometry
Type	Urinalysis Analyzer
Test Types	Urine Chemistry
Connectivity	RS232 port
Weight	5.0 kg
Power Supply	100-240 V AC, 50-60 Hz
Data Storage	Up to 200 patient results
Test Parameters	Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ketone, Bilirubin, Glucose
Test Strips	Multistix and other compatible strips