CLINITEK Status+ Analyzer Operator’s Guide 43
Operations
2. Select Notes to view the sample interference notes, if the analyzer
generated them for the test.
The Interference notes screen displays up to 5 sample
interference notes.
Note If you disable the Sample Interference Notes setting in
Instrument Set Up, or the analyzer does not generate sample
interference notes, the Notes button does not display. If you run a
test with this feature disabled, the analyzer does not generate
notes at the time of the actual test. If you enable the Sample
Interference Notes setting, and then recall the test results, the
analyzer generates notes for this patient test.
3. Select the up and down arrows to scroll through the notes.
4. Select Done to return to the main Results screen.
Printing the Urinalysis Strip Full Test Results
Print the urinalysis strip Full Test results manually or automatically, or
send the results to a computer.
To print the urinalysis strip Full Test results manually, select Print to
print the test results.
The test results printout includes the following information:
• Patient name and Patient ID
• Urinalysis strip type
• Lot number, if configured
• Lot expiration date, if configured
• Test date
• Test time
•Operator
•Test number
• Color
•Clarity
• Results (If the results are positive, an asterisk (*) displays next
to the results, only if you selected Mark Positive Results in
Instrument Set Up.)
To Next Page
Loading...
Need help?
General
