CLINITEK Status+ Analyzer Operator’s Guide 105
System Configuration
Changing the Results Format
You can display and print the test results in different formats. You also
can specify whether you want to include the instrument serial number
with the results.
You can select any of the following results formats:
•Normal System
○ Conventional
○ SI (Systéme International)
○ Nordic units
• Plus System
• Mark positive results with an asterisk (*)
• Store the instrument serial number in the patient records
To change the results format, perform the following steps:
1. On the Select Ready screen, select Instrument Set Up.
2. On the Choose Settings screen, select Instrument Settings.
3. On the Instrument Settings screen, select Results Format.
The Choose Format 1 of 2 screen displays.
Note If you set the language to Chinese, the Choose Format 1 of
2 screen does not display.
To Next Page
Loading...
