Siemens CLINITEK Status+ User Manual

66 CLINITEK Status+ Analyzer Operator’s Guide
Troubleshooting
Advisory Error Messages
An advisory error message is of less importance, and displays on the
Select Ready screen the next time the Select Ready screen displays.
When you perform the corrective action, the analyzer removes the
message from the screen.
If more than one advisory error occurs, when you clear the first
advisory error message, the analyzer displays the next advisory error
message.
Results Alert
If an error occurs during testing and the test cannot continue because
of the error, a message displays on the Results Alert screen. The
results alert error message provides details about the error and shows
that the test was cancelled. The analyzer pushes out the test table so
that you can remove the urinalysis strip or cassette.
Errors and Advisory Messages
The following table contains the error codes and descriptions, with
their probable causes and corrective actions.

Siemens CLINITEK Status+ Specifications

General

Display	LCD
Sample Type	Urine
Measurement Method	Reflectance photometry
Type	Urinalysis Analyzer
Test Types	Urine Chemistry
Connectivity	RS232 port
Weight	5.0 kg
Power Supply	100-240 V AC, 50-60 Hz
Data Storage	Up to 200 patient results
Test Parameters	Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ketone, Bilirubin, Glucose
Test Strips	Multistix and other compatible strips