Siemens CLINITEK Status+ - Page 89

CLINITEK Status+ Analyzer Operator’s Guide 89
System Configuration
Wired connectivity • Connectivity – Disabled
• IP Configuration – DHCP
•Gateway – No
• Comms Protocol – POCT1
•Host – None
For details about the gateway default
settings, print the system configuration
settings, see Viewing and Printing the
System Configuration Settings‚
page 127.
Wireless connectivity • Connectivity – Disabled
• Security – Disabled
• Authentication – Open system
• IEEE 802. 1X – Disabled
• Pre-shared Key – Disabled
• WEP Key Index – 1
• WPA Encryption – TKIP
• IP Configuration – DHCP
•Gateway – No
• Comms Protocol – POCT1
For details about the gateway default
settings, print the system configuration
settings, see Viewing and Printing the
System Configuration Settings‚
page 127.
Configuration Option Default Setting