Siemens CLINITEK Status+ User Manual

88 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
If you connect a CLINITEK Status+ analyzer to a CLINITEK Status
connector, the following configuration options are available.
System Settings Printer – Automatic
Test Type Quick Test
Test Sequence Number 0001
Time Format 12 hour
Urine Colors Light Yellow, Yellow, Dark Yellow,
Amber, Brown, Red, Orange, Pink Green,
Blue, Other
Urine Colors Customized None
Configuration Option Default Setting
Bar-code reader Disabled
Connectivity Platform Disabled
Network connection Serial connection
QC Cassette Level 1 – Positive
2 – Negative
QC Strip • QC Test Prompts – Disabled
• Type of Prompt – Required
• QC Confirmed by – Instrument
•QC Strip Lock-Out – No
•Tests per QC – 2
• Test Interval – Days
•Hours – 8
•Days – 1
•Number of Shifts – 3
QC Times • Shift 1 – 06:00
• Shift 2 – 14:00
• Shift 3 – 22:00
Configuration Option Default Setting

Siemens CLINITEK Status+ Specifications

General

Display	LCD
Sample Type	Urine
Measurement Method	Reflectance photometry
Type	Urinalysis Analyzer
Test Types	Urine Chemistry
Connectivity	RS232 port
Weight	5.0 kg
Power Supply	100-240 V AC, 50-60 Hz
Data Storage	Up to 200 patient results
Test Parameters	Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ketone, Bilirubin, Glucose
Test Strips	Multistix and other compatible strips