CLINITEK Status+ Analyzer Operator’s Guide 87
System Configuration
QC Cassette • QC test prompts – Disabled
• Type of prompt – Required
• QC confirmed by – Instrument
• QC Cassette Lock-out – Enabled
• Tests per QC – 2
• Test Interval – Days
•Hours – 8
•Days – 1
•Number of Shifts – 3
• QC Times – 06:00, 14:00, 22:00
For details about the QC control level
default settings, print the system
configuration settings, see Viewing and
Printing the System Configuration
Settings‚ page 127.
Results Format Units
Selection
Conventional
Results Printout • Custom information, internal
notes, operator name, patient
name, patient ID, serial number,
urine color, urine clarity – Enabled
• Header – Disabled
Sample Appearance None
Sample Interference
Notes
Enabled
Serial Port Connectivity • Enabled
• Baud rate – 57600
•Parity – None
• Stop Bits – 1
Serial Number Stored in
Patient Records
No
Software Upload Enabled
Sound On
Strip Type Multistix 10 SG
Configuration Option Default Setting
To Next Page
Loading...
