CLINITEK Status+ Analyzer Operator’s Guide 83
File Management
Note The QC feature is available only with a CLINITEK Status
connector. For details, see the CLINITEK Status Connect System
Operator’s Guide.
To delete the patient test results, perform the following steps:
1. On the Select Ready screen, select Recall Results.
The Recall Options screen displays.
2. Select Delete Records.
The system displays a confirmation message.
3. Select Yes.
CAUTION
Before you delete any test results, be sure that the loss of the
test results is acceptable. If you did not send the test results to
a host computer or printer, Siemens recommends that you
perform those tasks before you delete the results. Keep in
mind, the system erases the results from the database, and
you can no longer recall them.
To Next Page
Loading...
