Siemens CLINITEK Status+ User Manual

98 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
Patient ID • Enabled prompts you to
enter a patient ID when you
run a test.
• Disabled (default) does not
prompt you to enter a patient
ID when you run a test.
The system stores up to 950
patient test results.
When the patient test results list
contains 950 patient tests (or the
maximum amount for your
system), the system deletes the
oldest test from the list.
You cannot recall a deleted test
result.
Note If you disable Patient
Name and Patient ID, the system
displays a sequential test number
with the test results.
Bar-code reader settings 1. Select Barcode Reader
Settings.
2. Enable or disable the bar-code
reader:
○ Enabled requires you to
enter a patient name and
patient ID only by bar-code
reader.
○ Disabled (default) allows
you to enter a patient
name and patient ID by
bar-code reader, or by the
onscreen keyboard.
3. Select Done to return to the
Custom Settings Patient
Information, page 2 of 5
screen.
Custom Setting Description

Siemens CLINITEK Status+ Specifications

General

Display	LCD
Sample Type	Urine
Measurement Method	Reflectance photometry
Type	Urinalysis Analyzer
Test Types	Urine Chemistry
Connectivity	RS232 port
Weight	5.0 kg
Power Supply	100-240 V AC, 50-60 Hz
Data Storage	Up to 200 patient results
Test Parameters	Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ketone, Bilirubin, Glucose
Test Strips	Multistix and other compatible strips