Set Up Dial-Up Connection on Engineering PC
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 575
DC8-037-2.02, Edition 10.2017
In the last window of the settings, under the register tab IP SETTINGS, the box USE DEFAULT
GATEWAY ON REMOTE NETWORK must not be ticked. Confirm the inputs in each window with
OK.
In order to set up a connection, select via the Start menu the item Control Panel.
Click on CONNECT TO A NETWORK in the Network Sharing Center. Select the connection and
click on the button Connect.
To Next Page
Loading...
