Installation and Circuitry
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 195
DC8-037-2.02, Edition 10.2017
6.6.2 SIM Card (only CP-8022)
CP-8022 needs a SIM card for the communication via GPRS. This will be supported by your
mobile network provider.
You find further information in section 7.5.2, SIM Card (only CP-8022).
Note
Do not insert or remove the SIM card during operation of the device. This can damage the SIM card and
the device!
Please consider that the SIM card supports the required temperature range. Such kind of SIM cards are
frequently managed under the tariff M2M.
6.6.2.1 Inserting the SIM Card
In CP-8022 the SIM card is inserted in the front of the device.
Put the SIM card in the corresponding slot and press carefully until it engages.
6.6.2.2 Removing the SIM Card
Disconnect the device from the supply voltage and wait for at least 30 s.
Push the SIM card carefully until it is disengaged and springs out of the slot. The SIM card
can now be removed.
To Next Page
Loading...
Need help?
General
