Service
518 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
11.4.4.1 Initialization of the Firmware
With use of a suitable, still empty SD card, you must download the Firmwares from the web-
site http://www.siemens.com/sicam and copy it into the root directory of the SD card.
• CPC80
• optionally firmware for protocols
• optionally firmware for periphery
• SWEB00 in case of parameterization via SICAM WEB
When the required files are stored on the SD card, insert the SD card into the de-energized
target device and switch that on. During startup the firmwares are configured in the target de-
vice.
Note
The startup may last up to 15 minutes (depending on the number of firmwares).
11.4.5 Replacement of the SIM Card (only CP-8022)
When signing a new mobile radio contract or whith change of the mobile network provider you
will be supplied with a new SIM card.
For the activation of the GPRS communication you must replace the hitherto used SIM card
by the new one.
You find the hints for the replacement of the SD card in section 6.6.2, SIM Card.
Note
Removing or inserting the SIM card is allowed only in the de-energized device!
Subsequently, the access data must be adapted in the parameterization, see 9.1.2.6, Settings
for Internal GPRS Modem (CP-8022).
To Next Page
Loading...
Need help?
General
