Siemens LME7 Series - Display of Info Level; Display of Info Values; Identification Date; Identification Number

177/245
Building Technologies Division Basic Documentation LME7... CC1P7105en
Infrastructure & Cities Sector 23 Operation via AZL2… 29.11.2011
23.6.1 Display of info level
/
reset
1…3 s
P
Vh
mi n
s%
Bild 28/0707
Press
/
reset
until InFo appears.
When releasing
/
reset
, you are on the info level.
23.6.2 Display of info values
23.6.2.1. Identification date
P
V
h
min
s%
Bild 29/0707
On the left, parameter 102: is displayed blinking.
On the right, ._._ is displayed.
Example: 102: ._._
/
reset
1…3 s
P
Vh
mi n
s%
Bild 30/0707
Press
/
reset
for 1…3 seconds to display the
identification date DD.MM.YY.
Example: Identification date 03.11.05
/
reset
or
ESC
P
V
h
min
s%
Bild 29/0707
Press
/
reset
or
ESC
to return to the display of
parameters.
To the next parameter
23.6.2.2. Identification number
P
V
h
min
s%
Bild 31/0707
On the left, parameter 103: is displayed blinking.
On the right, identification number 0 appears.
Example: 103: 0
To the next parameter
or
/
reset
for < 1 s
Back to the previous
parameter