Siemens PROFINET SIRIUS 3RW5 - Page 120

Tag NodeId.
Identi󹪝er
Data format Unit
Displayed name and level Browse name i =
1s
t
2n
d
3r
d
4th level
Automatic parameterization active Automatic_parameterization_ac‐
tive_DIAG
1111 Bool -
Factory settings restored Factory_settings_restored_DIAG 1124 Bool -
Parameter assignment active Parameter_assignment_active_DI‐
AG
1180 Bool -
Parameter set 1 active Parameter_set_1_active_DIAG 1181 Bool -
Parameter set 2 active Parameter_set_2_active_DIAG 1182 Bool -
Parameter set 3 active Parameter_set_3_active_DIAG 1183 Bool -
Parameter set change not possible Parameter_set_change_not_possi‐
ble_DIAG
1184 Bool -
Parameters cannot be changed in
ON state
Parameters_can‐
not_be_changed_in_ON_state_DI‐
AG
1185 Bool -
Parameters disable CPU/master ac‐
tive
Parameters_disable_CPU/
master_active_DIAG
1186 Bool -
Pump cleaning Pump_cleaning 1041 - -
Pump cleaning active Pump_cleaning_active_DIAG 1189 Bool -
Safety Safety 1042 - -
Reset ON command required Reset_ON_command_required_DI‐
AG
1193 Bool -
Start condition ful󹪝lled Start_condition_ful󹪝lled_DIAG 1197 Bool -
Start condition not ful󹪝lled Start_condition_not_ful󹪝lled_DIAG 1198 Bool -
Self-test Self_test 1043 - -
Self-test active Self_test_active_DIAG 1195 Bool -
Switching frequency monitoring Switching_frequency_monitoring 1044 - -
Switching frequency lock active Switching_frequency_lock_ac‐
tive_DIAG
1203 Bool -
Switching frequency time running Switching_frequency_time_run‐
ning_DIAG
1204 Bool -
Test mode functions Test_mode_functions 1045 - -
Simulation active Simulation_active_DIAG 1196 Bool -
Test with small load active Test_with_small_load_active_DIAG 1206 Bool -
DeviceManual DeviceManual 1011 String -
DeviceRevision DeviceRevision 1012 String -
Faults and Warnings Faults_and_Warnings 1020 - -
Functions
8.4 OPC UA server
SIRIUS 3RW5 PROFINET communication modules
120 Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004