Dependencies
During parameterization, it is possible to select impossible combinations of interdependent
values. The diagnosis "Invalid parameter value" is then indicated in data set 92 of the 3RW5 soft
starter (slot 2) (Page 168). You will nd the dependencies of the parameters in the Equipment
Manual of the 3RW5 soft starter.
A.4.5.8 Data sets 132, 142, and 152: Parameter extended functions 1 - Set 1, 2, and 3
Read (r) and write (w) access to the parameter extended functions 1 is possible.
• Data set 132: Parameter set 1
• Data set 142: Parameter set 2
• Data set 152: Parameter set 3
The data sets 132, 142 and 152 are not supported by the 3RW50 and 3RW52 soft starters.
Parameters independent of the parameter set are only present in data set 132 and can only be
modied in this set.
Byte Data format Meaning 3RW55 /
55‑F
1)
0 Unsigned8 Coordination
[0x21] Write via acyclic bus channel – user program
x
2 Unsigned8 Slot number x
4 Unsigned16 Length of data structure x
6 Unsigned16 Start position x
1)
Supported by SIRIUS soft starters 3RW55 and 3RW55 Failsafe
Object
No.
Byte Bit Data format Parameters Value range
[encoding]
Incre‐
ment
3RW55 /
55‑F
1)
[D
3)
]
104 14 0 Unsigned16 Rated operating speed 500 … 3 600 rpm
[500 … 3 600]
1 rpm r/w
[1 500]
113 24 0 Unsigned16 Rated torque 0 … 10 000 Nm
[0 … 10 000]
1 Nm r/w
[0]
2236 66 0 Unsigned8 Switching frequency
monitoring mode
2)
[0 ... 2] - r/w
[0]
[0] Deactivated
[1] ON - ON
[2] OFF - ON
2237 67 0 Unsigned8 Maximum number of
starts
2)
2 … 255
[2 … 255]
1 r/w
[2]
2238 68 0 Unsigned16 Switching frequency
monitoring time t1
2)
0 … 65 535 s
[0 … 65 535]
1 s r/w
[0]
2239 70 0 Unsigned16 Switching frequency
monitoring time t2
2)
0 … 65 535 s
[0 … 65 535]
1 s r/w
[0]
Appendix
A.4 Data sets
SIRIUS 3RW5 PROFINET communication modules
190 Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
To Next Page
Loading...
