Siemens PROFINET SIRIUS 3RW5 - Operation without PN control

Tag NodeId.
Identi󹪝er
Data format Unit
Displayed name and level Browse name i =
1s
t
2n
d
3rd level
Active power Active_Power_P 51 UInt32 W
Asymmetry Phase_Unbalance 31 Byte %
Motor temperature rise Thermal_Memory 30 Byte %
Phase current I L1 (%) Current_I_L1 34 UInt16 %
Phase current I L2 (%) Current_I_L2 35 UInt16 %
Phase current I L3 (%) Current_I_L3 36 UInt16 %
Power factor L1...3 Cos_Phi 32 Byte %
Remaining motor cooling time Cooling_Down_Period 39 UInt16 s
Remaining time for motor overload
protection
Time_to_Trip 38 UInt16 s
Statistics Statistics 2 - -
Active energy import total Consumed_Energy 92 UInt32 kWh
Last tripping current IA (%) Last_Trip_Current 37 UInt16 %
Number of motor overload trips Number_of_Overload_Trips 73 UInt16 -
Number of starts motor CCW Int_Number_of_reverse_Starts 91 UInt32 -
Number of starts motor CW Int_Number_of_direct_Starts 90 UInt32 -
Operating hours - device Device_Operating_Hours 88 UInt32 s
Operating hours - motor Motor_Operating_Hours 86 UInt32 s
Phase current max (%) Max_Current_I_max 33 UInt16 %
8.5 Operation without PN control
The parameter "Operation without PN control" determines how the 3RW55 and 3RW55 Failsafe
soft starters behave in relation to a PLC. The parameter is only relevant in connection with the
use of the web server or OPC UA server.
Requirement
• 3RW5 PROFINET High Feature communication module from 󹪝rmware version V2.0
• Soft starter 3RW55 with 󹪝rmware version V2.1.1 or higher or soft starter 3RW55 Failsafe with
󹪝rmware version V1.1.0 or higher
Functions
8.5 Operation without PN control
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 135