Siemens PROFINET SIRIUS 3RW5 - Mount the 3 RW5 communication module in the slot of the 3 RW5 Soft Starter

4.1.2 Mount the 3RW5 communication module in the slot of the 3RW5 Soft Starter
Requirements
• 3RW5 soft starter with integrated slot (3RW52, 3RW55, 3RW55 Failsafe)
• Broken out slot cover (Page 37)
• Screwdriver PH1
Note
A magnetic screwdriver simpli󹪝es assembly.
Procedure


1P
Illustration similar
1. Push the 3RW5 communication module into the slot.
2. Secure the 3RW5 communication module with the fastening screws supplied at the lower
and upper mounting holes.
Result
You have mounted the 3RW5 communication module in the 3RW5 soft starter, which you
can connect to the 󹪝eldbus (Page 50) via the 3RW5 communication module.
Mounting and dismantling
4.1 Installing the 3RW5 communication module in the 3RW5 soft starter
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 39