Siemens PROFINET SIRIUS 3RW5 - Data Set 131: HMI Parameter (Slot 3)

Byte Bit Data format HMI diagnostics 3RW5
HMI HF
1)
12 0 Bool FW update rejected r
1 Bool FW update active r
2 Bool FW update successful r
3 Bool FWUpdateUnsuccessful r
4 Bool FWUpdateInvalidSignature r
13 0 Bool Self-test active r
2 Bool Error during self-test r
14 0 Bool Device assigned r
4 Bool HMI not con󹪝gured r
18 0 Bool Micro SD card active r
1 Bool Micro SD card access error r
2 Bool Micro SD card plugged r
3 Bool Micro SD card write-protected r
19 0 Bool LIActive r
20 0 Bool InvalidParameter r
22 3 Bool User account set up r
23 0 Bool No device answer r
24 0 Bool Write Error r
25 0 Bool Loading language rejected
2)
r
1 Bool Loading language active
2)
r
2 Bool Loading language successful
2)
r
3 Bool Loading language unsuccessful
2)
r
4 Bool Invalid signature 'Load additional language'
2)
r
26 0 Unsigned16 Faulty parameter number
3)
r
1)
Supported by 3RW5 HMI High Feature
2)
3RW5 HMI High Feature 󹪝rmware version V3.0 or higher
3)
3RW5 HMI High Feature 󹪝rmware version V2.0 or higher
A.4.6.2 Data set 131: HMI parameter (slot 3)
Read (r) and write (w) access to the HMI parameters is possible.
Byte Data format Meaning 3RW
50
1)
52
2)
55 /
55‑F
3)
0 Unsigned8 Coordination
[0x21] Write via acyclic bus channel – user program
x x x
2 Unsigned8 Slot number x x x
Appendix
A.4 Data sets
SIRIUS 3RW5 PROFINET communication modules
196 Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004