Siemens PROFINET SIRIUS 3RW5 - 3 RW5 HMI High Feature (Slot 3); Data Set 92: HMI Diagnostics (Slot 3)

Object
No.
Byte Bit Data format Parameters Value range
[encoding]
3RW55 /
55‑F
1)
[D
2)
]
2002 16 0 Unsigned16 Measured value 1 [20 000 ... 20 006] r/w
[20 000]
[20 000] Phase current I L1 (rms)
[20 001] Phase current I L2 (rms)
[20 002] Phase current I L3 (rms)
[20 003] Phase current average (rms)
[20 004] Active energy import total
[20 005] Active power
[20 006] Power factor L1...3
2003 18 0 Unsigned16 Measured value 2 (see Measured value 1) r/w
[20 001]
2004 20 0 Unsigned16 Measured value 3 (see Measured value 1) r/w
[20 002]
- 22 ...
23
- - Reserved - -
1)
Supported by SIRIUS soft starters 3RW55 and 3RW55 Failsafe
2)
Default encoding
A.4.6 3RW5 HMI High Feature (slot 3)
A.4.6.1 Data set 92: HMI diagnostics (slot 3)
Only read (r) access to the HMI diagnostics is possible.
Byte Data format Meaning 3RW
50
1)
52
2)
55 /
55‑F
3)
0 Unsigned8 Coordination x x x
2 Unsigned8 Slot number x x x
4 Unsigned16 Length of data structure x x x
6 Unsigned16 Start position x x x
1)
Supported by SIRIUS 3RW50 soft starter
2)
Supported by SIRIUS 3RW52 soft starter
3)
Supported by SIRIUS soft starter 3RW55 and 3RW55 Failsafe
Byte Bit Data format HMI diagnostics 3RW5
HMI HF
1)
10 0 Bool HMIFault r
1 Bool Run r
11 0 Bool Factory settings restored r
Appendix
A.4 Data sets
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 195