Siemens PROFINET SIRIUS 3RW5 - Messages and diagnostics; LED display

Messages and diagnostics
7
The 3RW5 communication module provides you with the following diagnostics options:
• LED display (Page 69)
• 3RW5 HMI High Feature
Menu: "Diagnosis > Communication module"
You will 󹪝nd more information on operating the 3RW5 HMI High Feature in the Equipment
Manual of the 3RW5 soft starter.
• SIRIUS Soft Starter ES (TIA Portal) Premium / Professional via 3RW5 communication module
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Commissioning" > Window "Work area" > "Soft Starter / HMI > Diagnosis"
• SIRIUS Soft Starter ES (TIA Portal) via local interface on the 3RW5 HMI High Feature
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) Premium / Professional
via 3RW5 communication module
• Controller (e.g. SIMATIC S7-1500)
– Con󹪝guration software of the controller (e.g. STEP 7) (Page 71)
– User program via data sets (Page 77)
• Web server (Page 92) (only for 3RW5 PROFINET High Feature communication module)
• OPC UA server (Page 106) (only for 3RW5 PROFINET High Feature communication module)
You will 󹪝nd faults and remedial measures for the 3RW5 communication module in chapter
Errors and remedial measures on the 3RW5 communication module (Page 80).
7.1 LED display
7.1.1 Device LEDs on the 3RW5 PROFINET communication modules
The diagnostics of the 3RW5 communication module is displayed by LEDs on the
3RW5 communication module under the hinged cover of the 3RW5 soft starter. The LEDs brie󹪞y
light up simultaneously at the start-up of the 3RW5 communication module (LED test).
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 69